Wear-Resistant Transfer Highly Corrosive Liquid Rubber Lobe Pump
Product Overview
Accuvon Rubber Rotary Lobe pump are super self-priming. This
positive displacement is similar to a gear pump, but the lobes
don't touch each other and turn independently. Lobe pumps are
utilized for transfer liquid of various viscosity and air/water
mixture.
The feature a robust design (in between bearing support), that
enable operation operation at high pressure and low vibration.
Intermediate isolation chamber, ensure the gearbox are isolated
from medium, even if there a leak.
Built-in gear reducer is optional, for space saving.
Material: Cast iron/Cast steel/Stainless steel and various polymer.
Specifications:
| Description | Rubber Lobe Pumps |
| Rotor | Rubber Rotor |
| Seal | Mechanical seal |
| Axial and radial casing protection | High-strength steel , resistant to wear |
| Drive | Electrical Motor, Diesel Engine |
| Material of pump | Cast iron |
| Pressure | 0-1.6 Mpa |
| Flow | 2.7-164 m³/ h |
| Power | 11-55 / KW |
| Speed | 10 - 600 rpm |
| Rate of flow | 4.566 l/rev |
| Work efficiency | Up to 85% |
| Medium | High-corrosive / high-viscous / Liquid containing various media |
| Self - priming | Up to 9.5m vertical / 30m horizontal |
| Custom printing | Acceptable |
Parameter of AF 125
| Drive | Weight | Dimensions |
| KW | KG | L / mm | H / mm |
| 5.5 | 473 | 1518 | 548 |
| 7.5 | 485 | 1578 | 548 |
| 11 | 526 | 1638 | 604 |
| 15 | 590 | 1683 | 604 |
| 18.5 | 604 | 1828 | 654 |
| 22 | 692 | 1878 | 654 |
| .30 | 725 | 1938 | 694 |
Design 1 | Short, straight pipe connectors with connection flange
and gasket, in mm / inches approx.
| AF 125 | DN 100 / mm | DN 125 / mm | DN 150 / mm | DN 200 / mm | DN 250 / mm |
Note: Above flange is regular for AF125 , besides we also offer various
flange connection according to your requirements
1. Tested medium in the table: water.
2. Speed, flow rate, electrical power and pressure will be
according to different liquid properties.
3. Port size can be changed as needed.
4. ACCUVON reserves the right to change specifications without
prior notification.
8 steps for your guideline to select ACCUVON pump
- What medium do you need to pump.
- Product viscosity in pump, line and at rest.
- Solid content and percentage concentration
- Specific gravity
- Capacity required
- Pumping temperature
- Discharge pressure or sketch of pipework system
- Suction pressure or sketch of pipework system
Advantage
• Low shear/Pulse free operation
• Excellent for oil/water and high viscosity liquid.
• Ability to pump at constant pressure at different flow rates
• Self-priming to 8 meters
• Forward and reverse pumping operation
• Space-saving compact design
• 10 to 1 turn down capability and reverse capability
• Run dry ability for a period of time
Structure features
The pump cavity design is so simple. All models of pumps retain
simple design styles. The fast -opening pump cover is opened to
provide guarantee for user maintenance personnel without
disassembling the pipeline. The driver can guarantee online repair.
Greatly reduced the stop time. Before and after, the upper and
lower wear -resistant internal lining design, comprehensively
ensure the non -wear of the pump shell and ensure long -term
durability. Such a simple maintenance characteristics reduce the
operating cost of the entire life cycle of the equipment.
Quality inspection photos
